Polar Shear Bolt – S114

Steel Shear Bolt for the early Polar 107 Paper Cutters, up to serial number 611352. (equivalent to Polar 208939, 220575) The main shank on this hex head shear bolt or shear pin is 10mm in diameter and it is 65mm (2-9/16″) long below the head. It has an M10 thread and has a cross hole drilled through the shank at the break point. Included with each of these shear pins is a mating hex nut (equivalent to Polar 208940). The nut, as well as the hex head on the bolt, measure 17mm (.67″) across the hex flats.

Note that the later Polar 107 cutters (after serial number 611352) use a larger shear bolt or safety bolt which measures 12mm in diameter but are also 65mm long. See our part number S92 for this larger shear bolt for the later Polar 107 cutters.


Collection Eurocutter Knife Bolt – B706