Product

Polar Shear Bolt – S92

Alloy Steel Shear Pins for Polar 107 EL and ST (after machine serial number 611352), Polar 112 EL, Polar 115 EL, Polar 115 CE, Polar 115 CS, Polar 115 ST, & Polar 115 EMC Paper Cutters (equivalent to Polar 221719 and 207466) This shear bolt or safety bolt is designed and engineered to replace the original factory overload shear bolt. The main shank on this safety bolt is 12mm (.47″) in diameter, except where it is undercut. It is 65mm (2-9/16″) long below the head. It has an M12 x 1mm thread with a 17mm hex head.

Included with each of these shear bolts is a mating hex nut (Polar nut part number 205517).

(Also see our PART NUMBER S103 for shear bolts for the Polar 115 EMC II paper cutters.) Note that some of the early Polar 107 cutters (before machine number 611353) did not use this shear bolt but used a smaller (10mm diameter x 65mm long) shear bolt with a cross drilled hole. See our part number S114 for these smaller shear bolts.

Specifications

Collection Eurocutter Knife Bolt – B706